IZIBEND 3 — hybrid tube and profile bending machine (30 mm)
Hybrid bending centre with 3 or 5 electric axes for compact tubes and profiles.
The IZIBEND 3 is a hybrid bending centre available with 3 or 5 electric axes, designed for round tubes up to 30 x 2 mm in steel, 25 x 1.5 mm in stainless steel and 35 x 2 mm in light alloy held in the clamp. It combines Sportelli.Tech 3D software with real-cycle simulation, a FANUC package and a compact head for round tubes, square tubes and special profiles. Lengths, maximum radius and bending direction are defined project by project; the three starred dimensions can be modified on request.
Positioning
Compact hybrid machine for round tubes, square tubes and special profiles, with automatic management of stretch bending, compression bending or variable radius and 3D simulation of the real cycle.
Technical specifications
- Max steel round tube diameter : 30 x 2 mm
- Max stainless steel round tube diameter : 25 x 1.5 mm
- Max light alloy round tube in clamp : 35 x 2 mm
- Maximum bending radius : 100 mm*
- Useful length on clamp : 3000 mm*
- Useful length on rear mandrel : 4200 mm*
- Max carriage passage diameter : 40 mm
- Y bending speed : 150°/s
- X tube feed speed : 1200 mm/s
- Z tube rotation speed : 600°/s
- Y axis accuracy : ±0.05°
- X tube feed accuracy : ±0.05 mm
- Z axis accuracy : ±0.05°
- Supply voltage : 400/480 V
- Supply frequency : 50/60 Hz
- Maximum power : 15 kW
- Approximate weight : 1700 kg
- Bending direction : Right or left
Target outcomes
- Bend tubes and profiles in steel, stainless steel, aluminium or copper in a compact configuration.
- Prepare and check cycles with Sportelli.Tech 3D software and full real-cycle simulation.
- Use FANUC control with brushless electric axes on a hybrid base.
- Produce complex shapes thanks to the compact head footprint.
Functions / options
- 3- or 5-electric-axis version depending on production requirements.
- Separate operator console with multitouch screen depending on configuration.
- Possible integration of cutting, punching and/or marking units.
- Wiper support, shaped clamp, opening die and mandrel lubrication available as options.
- Interchangeable bending shaft subject to tooling study, with no automatic reuse guarantee.
Activity sectors
Automotive, HVAC, Aerospace, Naval, Profiles, Furniture, Childcare, Construction, Motorcycle, Cycle, Medical, Urban furniture/playgrounds, Agriculture, Public works
Photos, descriptions and technical data are indicative and non-contractual. The maximum bending radius, useful clamp length and useful rear mandrel length can be modified on request.
Related activity sectors
- Automotive
- Childcare
- Naval
- Urban furniture
- Profiles
- Agriculture & Public works
- Medical
- Aerospace
- Furniture
- Construction
FAQ — IZIBEND 3
Is the IZIBEND 3 a fully electric bender?
No. The IZIBEND 3 is a hybrid machine offered with 3 or 5 CNC-controlled brushless electric axes.
What are the key IZIBEND 3 capacities?
The stated capacities are 30 x 2 mm for steel round tube, 25 x 1.5 mm for stainless steel round tube and 35 x 2 mm for light alloy in the clamp.
Which dimensions can be modified on request?
The maximum bending radius of 100 mm, useful clamp length of 3000 mm and useful rear mandrel length of 4200 mm are the three starred values marked as modifiable on request.
Can existing tooling be reused?
The interchangeable bending shaft may allow some existing tooling to be adapted, but only after a technical review of the tooling and part.
Which operations can be integrated?
Depending on configuration, cutting, punching and/or marking units can be integrated into the bender.
What is the IZIBEND 3 used for?
The IZIBEND 3 suits workshops that need a compact hybrid bender for small-diameter tubes, special profiles and varied production runs. It can manage stretch bending, compression bending and variable-radius bending depending on machine configuration, tooling and the part to produce.
Which technical limits must be confirmed?
The stated capacities are technical-sheet references and do not replace part validation. Material, wall thickness, radius, useful length, existing tooling and integrated operations must be reviewed before quotation, especially when the interchangeable shaft is considered for an existing tooling set.
How can an IZIBEND 3 be configured?
Configuration is defined with 3 or 5 electric axes, right or left bending, multitouch screen depending on configuration, and options such as cutting, punching, marking, wiper support, shaped clamp, opening die or mandrel lubrication. Contact Sportelli.Tech to validate the configuration for your tubes, radii and production rates.